AudioRoundTable.com: Speaker » Audio Note AN-K - Changing internal wiring from silver to copper

Home » Audio » Speaker » Audio Note AN-K - Changing internal wiring from silver to copper

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Audio Note AN-K - Changing internal wiring from silver to copper [message #60078]

Tue, 07 July 2009 04:31

soundguest
Messages: 1
Registered: July 2009

Esquire

I recently bought a pair of Audio Note AN-K speakers, for use with my Audio Note M2 preamp and P1SE power amp. These are stunning speakers, which also work well with my 120 watt solid state Exposure monoblocks.

However, there is a slight leanness and brightness to the sound. The speakers are internally wired with Audio Note's Spe silver cable, and I am attributing some of the brightness and leanness to the sound of this cable. I am contemplating having the speakers re-wired with Audio Note's copper Lexus cable. Would this provide a bit more warmth and body?

I'd be grateful to hear from anyone who has compared the copper and silver wired versions of AN speakers.

Report message to a moderator

Re: Audio Note AN-K - Changing internal wiring from silver to copper [message #60612 is a reply to message #60078]

Sun, 16 August 2009 17:57

dB
Messages: 234
Registered: May 2009

Master

I don't have (any) experience, but I would say the cables are not the culprit. It must be the tweeter, in this case (since you have them/tweeters - I'm just guessing like a said) a bad job in xover design. You probably want a more relaxed sound with an attenuation on highs of 1 or 2 dB's. The type of room/furniture and distance to speakers can also affect the overall.

John Fogerty - Deja Vu

Report message to a moderator

Previous Topic:	JBL K2 and Everest speakers
Next Topic:	Basic requirements for phase plug in horn loaded cone driver?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Dec 11 18:39:35 CST 2024