Does the tower pipe rez. increase the spl in the 75-80 hz range ?
I know you have said that you are using the port hemoholtz as the primary ,but the pipe freq. is still there. Thanks, I hope you can put these words together right. I dont have any software that models these type of cabinets.
Wayne Parham Messages: 18787 Registered: January 2001
Illuminati (33rd Degree)
I modeled the two π tower using Martin King's spreadsheets. I paid the license fee specifically to help develop this speaker, since the tower is physically tall and would suffer pipe modes in the passband. The woofer and port positions were chosen so Helmholtz resonance is the predominate tuning mechanism, reducing the influence of pipe modes by both position and damping.
You'll notice the plans suggest insulation span the cross-section of the cabinet, laying on the braces spaced 1/3rd the way from the top and 1/3rd the way from the bottom. This, in addition to the insulation on the cabinet walls and the position of the port and woofer, smooths pipe modes to the point where they are invisible to measurement and inaudible to the ear.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
