AudioRoundTable.com: General » how to use a multimeter when installing car audio system?

Home » Audio » General » how to use a multimeter when installing car audio system?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

how to use a multimeter when installing car audio system? [message #59801]

Mon, 06 July 2009 00:15

audiophile
Messages: 1
Registered: July 2009

Esquire

i would like to know how to use a multimeter to check if i have a good ground and check the rest of the system.

Report message to a moderator

Re: how to use a multimeter when installing car audio system? [message #59826 is a reply to message #59801]

Mon, 06 July 2009 00:42

music
Messages: 1
Registered: July 2009

Esquire

on the multi meter take the black wire and attatch it to your cars ground wire for the cd deck. then take the red wire on the multi meter and touch the power wire. should jump really to 12v if u got good ground

Report message to a moderator

Re: how to use a multimeter when installing car audio system? [message #59832 is a reply to message #59801]

Mon, 06 July 2009 00:46

euphonics
Messages: 1
Registered: July 2009

Esquire

You can check the ground using this link...
http://www.the12volt.com/installbay/forum_posts.asp~TID~49445~PN~1

You can set your gain by using these links...
http://mobile.jlaudio.com/support_pages.php?page_id=143
http://www.thesuicidaleggroll.com/gain.htm

You can check the voltage at an amplifier by measuring across the power and ground cable. It should be around 13-14.4 volts at the amp when the car is running.

Good Luck!!!

Report message to a moderator

Previous Topic:	Can you Help? Audio amp wire routing.?
Next Topic:	Welcome to Crescendo Systems!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 26 20:50:06 CST 2024