AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 4 Pi plans

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: I don't see any bracing in the . . . [message #53203 is a reply to message #53202]

Tue, 10 February 2009 17:52

Wayne Parham
Messages: 18748
Registered: January 2001

Illuminati (33rd Degree)

It is a simple layout, and the bracing is simple too. I don't show bracing in any of my plans and instead leave it to the builder with the instructions "brace at least every 18 inches". You'll see that on the "General Notes" page.

Where I brace them is right in between the woofer and tweeter, and I use a cross-brace. That ties the front and back together, which is the most important panels to brace. It also ties the sides together. You could add a diagonal to the top and bottom, but I don't find it necessary. The most important panel to preload is the back.

Report message to a moderator

[Message index]

		4 Pi plans By: Steve Kaelin on Tue, 10 February 2009 12:59
		You've got mail! By: Wayne Parham on Tue, 10 February 2009 16:48
		I don't see any bracing in the . . . By: Steve Kaelin on Tue, 10 February 2009 17:24
		Re: I don't see any bracing in the . . . By: Wayne Parham on Tue, 10 February 2009 17:52
		Re: I don't see any bracing in the . . . By: Matts on Tue, 10 February 2009 19:21
		Re: I don't see any bracing in the . . . By: Wayne Parham on Tue, 10 February 2009 23:24
		Re: I don't see any bracing in the . . . By: Steve Kaelin on Tue, 10 February 2009 20:56
		Re: I don't see any bracing in the . . . By: Wayne Parham on Tue, 10 February 2009 23:08

Previous Topic:	2 PI Towers Do Not Like Rock 'n Roll
Next Topic:	Faital HF10X instead of DE250

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Aug 14 13:09:22 CDT 2024