AudioRoundTable.com: Pi Speakers » experience with compression drivers.

Home » Sponsored » Pi Speakers » experience with compression drivers.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: experience with compression drivers. [message #53085 is a reply to message #53084]

Wed, 14 January 2009 11:36

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

I evaluated both the DE250 and DE500 drivers, and liked them both. The DE250 sounded a little smoother to me, but that may have been because I knew the DE500 had a titanium diaphragm. They actually measure pretty much the same. The DE500 is very well behaved, in my opinion. It also has a neodymium magnet. But the DE250 is still my favorite of the two.

There is one area that I'm still evaluating. That is long term reliability. I have used Eminence and JBL compression drivers for years and I know what to expect from them in just about every situation. They are very durable, handle power well, and last a long time. I expect a PSD2002 or 2426 to last a lifetime. The B&C drivers are relatively new for me, and I am wondering how the polyimide diaphragms (used in the DE250) will hold up over the years. This has yet to be seen.

Report message to a moderator

[Message index]

		experience with compression drivers. By: jeff p on Wed, 14 January 2009 11:07
		Re: experience with compression drivers. By: Wayne Parham on Wed, 14 January 2009 11:36
		Re: experience with compression drivers. By: jeff p on Wed, 14 January 2009 13:16
		Re: experience with compression drivers. By: Wayne Parham on Wed, 14 January 2009 14:07
		Re: experience with compression drivers. By: jeff p on Thu, 15 January 2009 17:32
		Speakers and room as a system By: Wayne Parham on Thu, 15 January 2009 18:07

Previous Topic:	4pi: floor mount or stand mount? / plans needed
Next Topic:	Omni-Pi

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 25 19:22:04 CST 2024