AudioRoundTable.com: Pi Speakers » experience with compression drivers.

Home » Sponsored » Pi Speakers » experience with compression drivers.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

experience with compression drivers. [message #53084]

Wed, 14 January 2009 11:07

jeff p
Messages: 16
Registered: May 2009

Chancellor

just wondering what everyone has been using.
it seems the psd2002 isn't bad but the DE250 is recommended.

what about the B&C de400, de400tn and the de500?
the de400tn seems to almost be a de250 with a shorting while the de500 has a shorting ring but is titanium instead of polyamide.
the de400 fr doesn't look as flat as the 250 and the 500 though.

can anyone comment on the sounds of these or has nobody tried them?
the de400 isn't much more than the de250.

Report message to a moderator

[Message index]

		experience with compression drivers. By: jeff p on Wed, 14 January 2009 11:07
		Re: experience with compression drivers. By: Wayne Parham on Wed, 14 January 2009 11:36
		Re: experience with compression drivers. By: jeff p on Wed, 14 January 2009 13:16
		Re: experience with compression drivers. By: Wayne Parham on Wed, 14 January 2009 14:07
		Re: experience with compression drivers. By: jeff p on Thu, 15 January 2009 17:32
		Speakers and room as a system By: Wayne Parham on Thu, 15 January 2009 18:07

Previous Topic:	4pi: floor mount or stand mount? / plans needed
Next Topic:	Omni-Pi

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jul 15 16:30:35 CDT 2024