Home » Sponsored » Pi Speakers » Three pi subs 92 db ?
Three pi subs 92 db ? [message #53070] Sat, 10 January 2009 22:44 Go to next message
Wayne-o is currently offline  Wayne-o
Messages: 225
Registered: May 2009
Master
How do you get 92 db ? does the box add gain to the 89 db lab 12 ?
THANKS

Re: Three pi subs 92 db ? [message #53071 is a reply to message #53070] Sun, 11 January 2009 12:01 Go to previous messageGo to next message
Matts is currently offline  Matts
Messages: 359
Registered: May 2009
Grand Master
bass reflex designs use energy from the rear of the speaker interacting with the volume of air in the port to give some additional efficiency over sealed box designs

Re: Three pi subs 92 db ? [message #53072 is a reply to message #53070] Sun, 11 January 2009 14:51 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18787
Registered: January 2001
Illuminati (33rd Degree)

You might notice the page where that spec is listed gives conditions where measurements were taken. All specs are given at 2.83v/M rather than 1w/M. The woofer is a 4Ω part, so 1 watt is dissipated with a 2.0v drive signal. Send it 2.83v and 2W is dissipated, which is 3dB higher.


Previous Topic: How Do I Connect Speaker Wire To These Spades?
Next Topic: Are tweeters and woofers supposed to be flush mounted for Pi Two kit? NT
Goto Forum:
  


Current Time: Fri Nov 22 23:41:37 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest