AudioRoundTable.com: Pi Speakers » Adding DE250 to 4 Pi?

Home » Sponsored » Pi Speakers » Adding DE250 to 4 Pi?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Adding DE250 to 4 Pi? [message #52712 is a reply to message #52710]

Tue, 07 October 2008 12:03

Wayne Parham
Messages: 18727
Registered: January 2001

Illuminati (33rd Degree)

Connect the drivers as shown in the schematic. Also, be sure to change R1 and R2, because voltage sensitivity of the DE250 is a little higher than the PSD2002.

Report message to a moderator

[Message index]

		Adding DE250 to 4 Pi? By: GarlandGarland on Tue, 07 October 2008 10:24
		Re: Adding DE250 to 4 Pi? By: Matts on Tue, 07 October 2008 11:57
		Re: Adding DE250 to 4 Pi? By: Wayne Parham on Tue, 07 October 2008 12:03
		Re: Adding DE250 to 4 Pi? By: GarlandGarland on Tue, 07 October 2008 15:10
		Re: Adding DE250 to 4 Pi? By: Wayne Parham on Tue, 07 October 2008 15:54

Previous Topic:	4 pi plans
Next Topic:	Recommended toe in

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jul 17 23:42:22 CDT 2024