AudioRoundTable.com: Pi Speakers » I will check the cables first...I will check the cables first...I will check the cables first...

Home » Sponsored » Pi Speakers » I will check the cables first...I will check the cables first...I will check the cables first...

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Don't ask? [message #52560 is a reply to message #52557]

Sun, 31 August 2008 06:12

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

Hardly compelling; discovering a ground fault hum when first powering up Friday, I went after the known loose RCA females attached to the Faraday cage of my tonearm. 4 hours later, I can now field-strip an SME III in the dark but everything is OK except I can discern no way to tighten the crimp-on connectors to the cage.

Turning to the phono IC's, I discover no continuity for the right channel neutral in about 10 seconds and fix it in 10 minutes.

As others have reported, the Eichmann Bullet neutral pin is fragile and had broken right where it inserts into the plastic collar. I "glued" it back together with solder so expect it to fail again. No more Eichmanns for me.

Report message to a moderator

[Message index]

		I will check the cables first...I will check the cables first...I will check the cables first... By: Bill Epstein on Fri, 29 August 2008 22:51
		Don't ask? By: Wayne Parham on Sun, 31 August 2008 02:18
		Re: Don't ask? By: Bill Epstein on Sun, 31 August 2008 06:12
		Re: Don't ask? By: Matts on Sun, 31 August 2008 11:03
		Re: Don't ask? By: Wayne Parham on Sun, 31 August 2008 22:41

Previous Topic:	Woofer for Econowave
Next Topic:	2-Pi BASS ???

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 19:29:14 CST 2024