AudioRoundTable.com: Pi Speakers » Woofer for Econowave

Home » Sponsored » Pi Speakers » Woofer for Econowave

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 605A [message #52558 is a reply to message #52556]

Sun, 31 August 2008 02:32

Wayne Parham
Messages: 18791
Registered: January 2001

Illuminati (33rd Degree)

The Altec 605A driver will work well in boxes from 1.5ft3 to 6.0ft3 tuned to 45Hz. PiAlign suggests 3.6ft3 tuned to 45Hz using a rectangular port 4-3/4" x 8-1/2" and 7-7/8" long.

Report message to a moderator

[Message index]

		Woofer for Econowave By: ecc83 on Thu, 28 August 2008 18:08
		Re: Woofer for Econowave By: Wayne Parham on Thu, 28 August 2008 23:08
		Re: Woofer for Econowave By: ecc83 on Fri, 29 August 2008 08:23
		Re: Woofer for Econowave By: Wayne Parham on Fri, 29 August 2008 11:52
		Re: Woofer for Econowave By: ecc83 on Fri, 29 August 2008 14:02
		You've got mail! By: Wayne Parham on Fri, 29 August 2008 18:48
		Re: You've got mail! By: ecc83 on Fri, 29 August 2008 19:22
		605A By: ecc83 on Sat, 30 August 2008 10:47
		Re: 605A By: Wayne Parham on Sun, 31 August 2008 02:32
		Thanks for your help Wayne!!! (nt) By: ecc83 on Sun, 31 August 2008 04:26

Previous Topic:	HF bypass cap for active crossovers/EQ
Next Topic:	I will check the cables first...I will check the cables first...I will check the cables first...

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 01:27:06 CST 2024