Home » Sponsored » Pi Speakers » Two Towers tweeters
Two Towers tweeters [message #52436] Tue, 12 August 2008 01:04 Go to previous message
Shane is currently offline  Shane
Messages: 1117
Registered: May 2009
Illuminati (3rd Degree)
Wayne, I've been using the Two Towers nearly exclusively with the 12B4 amp since I got the cabinets together two years ago--they sound quite good together. This weekend I hooked up the NAD BEE amp to them and was really suprised with the high end. It was somewhat harsh most of the time (way past the sparkle zone) and I found I was having to roll the high freq. off on the amp almost all the way with every CD I put through. The CDP is a NAD BEE as well, and I've never had this be as bad with some of my other speakers. The amp/CDP combo tends to lean toward the high freq. side a little and I've always rolled it down just a hair. One thing about the NAD tone controls is that they do a very good job of just effecting the very upper/lower end, not like the old tone controls of the past. Is there anything I can try to "tame" the tweeters just a little?

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Live Sound PA speakers
Next Topic: stuffing midhorn back chamber?
Goto Forum:
  


Current Time: Tue Sep 17 12:17:51 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest