AudioRoundTable.com: Pi Speakers » Transporting 2-way speaker box to Open Baffle

Home » Sponsored » Pi Speakers » Transporting 2-way speaker box to Open Baffle

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Transporting 2-way speaker box to Open Baffle [message #52313 is a reply to message #52311]

Sat, 12 July 2008 09:50

ttan98
Messages: 35
Registered: May 2009

Baron

I am not such whether you can give some suggestions on where to start on the x-over design. I promise not to ask you too many questions once you give some suggestions.

The current x-over design using digital x-over, is at around 1.6Khz,3rd order Butterworth filter(Hp and LP), the horn I am using is 90*50 degree directivity. This horn is identical to the one used in the econowaveguide at Karma Forum. The woofer is 15" JBL.

Any suggestion on a start to x-over design is welcome, eg LR or butterworth and approx x-over frequency.

Thanks.

many thanks.

Report message to a moderator

[Message index]

		Transporting 2-way speaker box to Open Baffle By: ttan98 on Fri, 11 July 2008 03:04
		Re: Transporting 2-way speaker box to Open Baffle By: Wayne Parham on Fri, 11 July 2008 11:58
		Re: Transporting 2-way speaker box to Open Baffle By: ttan98 on Sat, 12 July 2008 09:50
		Re: Transporting 2-way speaker box to Open Baffle By: Wayne Parham on Sat, 12 July 2008 11:47
		Re: Transporting 2-way speaker box to Open Baffle By: ttan98 on Sun, 13 July 2008 00:35
		AudioRoundTable.com By: Wayne Parham on Sun, 13 July 2008 13:56

Previous Topic:	impedance curve
Next Topic:	4 pi crossover ???

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 06:15:35 CST 2024