Home » Sponsored » Pi Speakers » Comments on this low-efficiency 2-way?
Re: Comments on this low-efficiency 2-way? [message #52196 is a reply to message #52195] Wed, 11 June 2008 03:18 Go to previous messageGo to previous message
Kim Schultz is currently offline  Kim Schultz
Messages: 85
Registered: May 2009
Viscount
I would not crossover this high on a 10" inch woofer, there might be some nasty cone breakup modes up there.
The tweeter is a 28mm dome with a resonans freq. of 700hz, so it should be safe to cross anywhere from around 1500-2000hz/24db, and up.

The woofer response shows a rising response from 900-2300hz, so you might want to cross lower on the woofer, and use the natural rolloff combined with the crossover, to get the desired crossover point.

 
Read Message
Read Message
Read Message
Previous Topic: Plans 4 PI
Next Topic: So this is being a DJ...
Goto Forum:
  


Current Time: Wed Jul 17 12:22:57 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest