Home » Sponsored » Pi Speakers » 4 pi JBL2226
4 pi JBL2226 [message #52173] Wed, 28 May 2008 21:46 Go to next message
Wayne-o is currently offline  Wayne-o
Messages: 225
Registered: May 2009
Master
Is the one in the 4 pi 8 ohm or 4 ohm??? Thanks for your reply !!!

Report message to a moderator

Re: 4 pi JBL2226 [message #52175 is a reply to message #52173] Wed, 28 May 2008 22:46 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18791
Registered: January 2001
Illuminati (33rd Degree)

The woofer used in the four π loudspeaker is a JBL 2226H, which presents approximately an 8Ω load. Maximum impedance is 35Ω at 17Hz. Maximum impedance in the passband is 25Ω at 72Hz. Minimum impedance is 6Ω at 150Hz.

The impedance chart for the four π speaker is shown below:

Report message to a moderator

Previous Topic: LaScala
Next Topic: My 2 Pi Towers Review
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Nov 30 17:31:04 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest