Wayne Parham Messages: 18787 Registered: January 2001
Illuminati (33rd Degree)
Sorry, no. I haven't done a design around that woofer. It may work, but without some measurements, I can't say for sure. The cabinets and crossovers are designed with specific drivers in mind. Models with optional drivers have crossover changes that are specific to the drivers used. So I can't recommend alternative drivers other than those shown in the options lists for each model.
The KAPPA PRO 12" has an fs=37Hz, lower 10Hz from the 15", and higher Xmax of 4.8mm vs. 3.2mm for the 15" what's good also. It is also possible to use the software PiAlign (by Wayne) that may give very good designs for DIY and is not difficult to learn.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
