AudioRoundTable.com: Pi Speakers » 7pi crossover plans

Home » Sponsored » Pi Speakers » 7pi crossover plans

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: You've got mail! [message #51996 is a reply to message #51995]

Thu, 10 April 2008 13:14

DICK
Messages: 17
Registered: May 2009

Chancellor

Yes sir I did that and then I could print it thankyou. Now I got a question about the crossover. Since I'm using a 2226 in a bass bin to the midrange horn, am I following the schematic for the 4pi up to the woofer, then pick up from there with the schematic for the 7pi midhorn & tweeter? Also I'm a little vague with the tweeter since I'm using the b&c 250. Will R1 & R2 require higher ohm's? And what mH would L2 need. And is the tweeter's polarity normal or reversed? You bet-cha I'm cornfused. Thanks Wayne.
Rick

Report message to a moderator

[Message index]

		7pi crossover plans By: DICK on Wed, 09 April 2008 15:34
		You've got mail! By: Wayne Parham on Wed, 09 April 2008 19:19
		Re: You've got mail! By: DICK on Thu, 10 April 2008 13:14
		Driver polarity By: Wayne Parham on Fri, 11 April 2008 11:41

Previous Topic:	Mid-horn flare; how critical are the dimensions?
Next Topic:	2pi crossover and box plan

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 05:09:29 CST 2024