AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Weak Joint

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

PL Adhesive [message #51879 is a reply to message #51878]

Thu, 06 March 2008 15:43

Wayne Parham
Messages: 18835
Registered: January 2001

Illuminati (33rd Degree)

MDF is pretty inexpensive so if it isn't veneered, you could just start over. On the other hand, you could repair the cabinet by filling the joint with PL adhesive. Force the adhesive in the crack to fill it completely. It will expand slightly as it dries. Then sand it smooth and finish the cabinet with veneer or paint as you originally intended. This adhesive is very strong even when there is a gap between surfaces up to 3/8". I'm sure it will solve your problem.

Report message to a moderator

[Message index]

		Weak Joint By: Champion on Thu, 06 March 2008 15:29
		PL Adhesive By: Wayne Parham on Thu, 06 March 2008 15:43
		Re: PL Adhesive By: Champion on Thu, 06 March 2008 17:21
		Re: PL Adhesive By: Wayne Parham on Fri, 07 March 2008 11:26

Previous Topic:	Omega/DE250 Crossover Wired For BiAmp
Next Topic:	cross over

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Feb 18 12:58:44 CST 2025