AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Cabinet Material

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Cabinet Material [message #51808]

Sun, 10 February 2008 19:47

Champion
Messages: 40
Registered: May 2009

Baron

I am planning to build a 3pi and according to Wayne, MDF and baltic birch are the best cabinet material. I would like to use ply for the better finish but it is hard to get baltic birch in New Zealand. Can I use other ply such as brownwood ply or Chinese ply? Or any other recommendation?

Also, is it ok to use 3/4" thick instead of 5/8" and adjust the cabinet size accordingly to get the right internal volume? Or do I even need to adjust the size as all?

Finally, I would like to say thanks to Wayne's great customer service and support. I hope the speakers are just as great!

Report message to a moderator

[Message index]

		Cabinet Material By: Champion on Sun, 10 February 2008 19:47
		Re: Cabinet Material By: Wayne Parham on Sun, 10 February 2008 23:30
		Re: Cabinet Material By: Champion on Mon, 11 February 2008 02:33
		Mixed Cabinet Material By: Champion on Tue, 12 February 2008 08:31
		Re: Mixed Cabinet Material By: Wayne Parham on Tue, 12 February 2008 11:32

Previous Topic:	Compression units:- Eminence vs. B&C how do they compare?
Next Topic:	Pi studio 2

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Oct 05 06:16:10 CDT 2024