Hello Wayne, Started work on the above mentioned project. Began by drawing the motor chamber layout on the side panels. However I have trouble with two points on the plans which are not shown. The points where 1) MC9 and MC10 meet and 2) MC12 and MC11 meet.Could you clarify them for me. Or should I build the motor chamber first and let it fall to place?
Wayne Parham Messages: 18786 Registered: January 2001
Illuminati (33rd Degree)
The way we build them is to make the motor chamber first and then mount the completed assembly to the cabinet sides. The drawings were done with that in mind, and I don't think additional measurements are required. However, I can ask the draftsman to add those dimensions if you think it would be helpful.
You'll notice that in both of those, the sides of the motor chambers are formed by the sides of the horn cabinet. One of the early production model changes was to build the motor chamber complete with side pieces and attach the completed assembly to the horn cabinet. It comes together better that way and makes alignment of everything easier.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
