Home » Sponsored » Pi Speakers » alpha 10 /psd2002?
alpha 10 /psd2002? [message #51757] Wed, 23 January 2008 20:01 Go to next message
tmoore is currently offline  tmoore
Messages: 15
Registered: May 2009
Chancellor
Wayne, the wife has been cool with the ever growing collection of Pi speakers around the house but the tower 2's really are a little large for rear surrounds so I've been thinking... If I built a cabinet 36" tall with the same volume as the smaller pi 2 and used a psd 2002 tweeter to match the theater 4's we might both be happy. What would I need to do to the crossover to change tweeters? Would the box tuning need to be changed since the speakers will be right up against the rear wall?

BTW, I did get a little crown amp and it really woke up the theater 4's. The fan is noisy, but I don't even notice it after I put the amp in my entertainment center. I'm saving up for some JBL's now.

Re: alpha 10 /psd2002? [message #51763 is a reply to message #51757] Thu, 24 January 2008 09:46 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18787
Registered: January 2001
Illuminati (33rd Degree)

The eight π uses the Alpha 10 and PSD2002. The Alpha 10 drives a midhorn and the rear chamber is tuned similarly to the two π tower, so it works sort of like a mini-VOTT. You might like that design. If it is still too large, you could do something like you're talking about with a crossover like what is used in the three π or four π. Personally though, I'd stick with the stock two π or two π tower and use them as they are. The Vifa tweeter is a little smoother and milder, and that works perfectly for surrounds.


Previous Topic: Studios Question
Next Topic: Three pi sub
Goto Forum:
  


Current Time: Fri Nov 22 20:53:13 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest