AudioRoundTable.com: Pi Speakers » Impedance rise in hons

Home » Sponsored » Pi Speakers » Impedance rise in hons

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Impedance rise in hons [message #51712]

Sat, 12 January 2008 20:34

Bob Coley
Messages: 4
Registered: May 2009

Esquire

I'm hoping to build a horn with a large peak right at about 52hz. If I'm successful, would I get a substantial impedance rise at 52hz like I would with a ported box? Is it possible to design a horn with a large peak at 52hz? From my experience most horns are pretty flat, but that's not what I'm looking for. This horn will be striclty for competition. That's why the 52hz is so critical as is knowing the impedance rise. Does anyone know how to calculate the impedance rise?

Report message to a moderator

[Message index]

		Impedance rise in hons By: Bob Coley on Sat, 12 January 2008 20:34
		Re: Impedance rise in horns By: Wayne Parham on Sun, 13 January 2008 14:58
		Re: Impedance rise in horns By: Bob Coley on Sun, 13 January 2008 18:47
		Re: Impedance rise in horns By: Wayne Parham on Sun, 13 January 2008 20:23
		Re: Impedance rise in horns By: Bob Coley on Sun, 13 January 2008 20:47
		Re: Impedance rise in horns By: Bill Wassilk on Mon, 14 January 2008 11:32
		Re: Impedance rise in horns By: Wayne Parham on Mon, 14 January 2008 13:31

Previous Topic:	Stage Four and Seven Plans
Next Topic:	Pi 7 crossover

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Sep 01 21:18:51 CDT 2024