AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » JBL 2407

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

JBL 2407 [message #51477]

Mon, 15 October 2007 01:07

bebop
Messages: 3
Registered: May 2009

Esquire

A friend gave me a pair of JBL 2407. Can I use these for a 2 ways setup and if so what is optimum crossover points for them in a home setup. Thanks for any pointer.

Report message to a moderator

Re: JBL 2407 [message #51478 is a reply to message #51477]

Mon, 15 October 2007 08:35

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

Yes, you can use them similarly to other 1" exit compression drivers. This driver is actually a ring radiator made to drive a horn. You'll need an adapter to mount the standard 2/3 bolt pattern, JBL part number 339308-001. Crossover above 1.2kHz.

Report message to a moderator

Re: JBL 2407 [message #51479 is a reply to message #51478]

Mon, 15 October 2007 11:04

bebop
Messages: 3
Registered: May 2009

Esquire

I plan to cross them at 1600hz. Can I use Pi 1600hz crossover diagram (starting out with the C2, L1, etc...) for the 2407. Thanks for your help Wayne.

Report message to a moderator