AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 12 woofer

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

12 woofer [message #51409]

Tue, 18 September 2007 11:25

j.luis
Messages: 22
Registered: May 2009

Chancellor

Hy .Wayne do you believe that this Eminence 1512 with specs =Fs (41 hz) - Qts (0.65 ) - Qes ( 0.69) - Qms (8.95 ) - Vas ( 198 l) - Ebp (59.4) - Xmx ( 3mm ) - Spl ( 95 ) - Pwr (80 w ) could work in a Pi speaker . I modeled in Win Isd and give a enormous box 33 cuft but with a tuning frecuency of 21 hz using the scroll down handy option of Win Isd got a much more adequate box of 7 cuft with a tuning frequency of 37 hz . Do you believe that Pi program could give a better box ? I give thanks in advance for your much help . thanks

Report message to a moderator

Re: 12 woofer [message #51410 is a reply to message #51409]

Tue, 18 September 2007 14:09

Wayne Parham
Messages: 18786
Registered: January 2001

Illuminati (33rd Degree)

PiAlign suggests a 4.5ft3 (128 liter) cabinet tuned to 24Hz. It will work pretty well in cabinets from 4.0ft3 (113 liter) to 35ft3 (990 liter) tuned to 20Hz - 25Hz. You could also use it on an open or infinite baffle, perhaps mounted to one side of a room's wall, with the rear exposed to the open attic or an adjacent room.

Report message to a moderator

Previous Topic:	request plan
Next Topic:	Cornerhorn too much?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 26 14:54:12 CST 2024