AudioRoundTable.com: Pi Speakers » Two Pi towers with HiVi RT2C-A Planar transducers...?

Home » Sponsored » Pi Speakers » Two Pi towers with HiVi RT2C-A Planar transducers...?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Two Pi towers with HiVi RT2C-A Planar transducers...? [message #51251]

Sun, 08 July 2007 14:05

Eric89GXL
Messages: 4
Registered: May 2009

Esquire

I recently replaced the old-school piezoelectric tweeters in my 2Pi towers with the new DX-25's. The imaging is improved, but the tweeters seem to be at a lower level than the woofers now. The highs might be too subtle for me. I found this tweeter on parts express:

http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=297-406&ctab=2#Tabs

Wayne or others, how do you think this would stack up as a replacement tweeter? Seems like it would work well given the efficiency. I'm curious how I'd have to modify the crossover---maybe go to a second-order on the tweeter?

Also, Wayne, do you have a spec sheet available for the Eminence drivers in case I decide to redesign the x-over? I know I have one of the "newer" versions of the woofers that needed the inductor to tame the midrange honk.

Eric

Report message to a moderator

Re: Two Pi towers with HiVi RT2C-A Planar transducers...? [message #51253 is a reply to message #51251]

Mon, 09 July 2007 21:10

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

You could sure give it a try. The DX25 tweeter is a little lower sensitivity than the Alpha 10 woofer, but just a little. See the response curve below: