AudioRoundTable.com: Pi Speakers » altec valencia n-800-F crossover

Home » Sponsored » Pi Speakers » altec valencia n-800-F crossover

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: altec valencia n-800-F crossover [message #51202 is a reply to message #51198]

Mon, 25 June 2007 16:35

Wayne Parham
Messages: 18879
Registered: January 2001

Illuminati (33rd Degree)

I don't do any service work, but could probably recommend someone who can. As for speaker height, it's usually kind of a compromise for two-way speakers, since you want the midrange source raised to ear level for imaging but this causes midbass to suffer from floor bounce, which causes a notch in response. I tend to prefer leaving speakers as low as possible to the ground to remove floor bounce. Large-format two-ways work pretty well this way. Smaller cone/dome speakers tend to work better a little higher up off the ground.

Report message to a moderator

[Message index]

		altec valencia n-800-F crossover By: thaw on Thu, 21 June 2007 11:37
		Re: altec valencia n-800-F crossover By: Wayne Parham on Thu, 21 June 2007 13:53
		Re: altec valencia n-800-F crossover By: thaw on Thu, 21 June 2007 14:12
		Re: altec valencia n-800-F crossover By: Wayne Parham on Thu, 21 June 2007 19:43
		Re: altec valencia n-800-F crossover By: thaw on Mon, 25 June 2007 10:41
		Re: altec valencia n-800-F crossover By: Wayne Parham on Mon, 25 June 2007 16:35

Previous Topic:	9 pi midhorn
Next Topic:	Suitable top for basshorn

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Apr 26 14:22:02 CDT 2025