AudioRoundTable.com: Pi Speakers » Midrange Horn Measurement problems

Home » Sponsored » Pi Speakers » Midrange Horn Measurement problems

Sat, 12 May 2007 16:08

swett
Messages: 47
Registered: May 2009

Baron

Here is a measurement I did 20 degrees below the horn with 2" long top and bottom transitions at a 50 degree angle to the horn's axis.

Not perfect, but still pretty respectable I felt. I'll post the same measurement without the transitions next.

		Midrange Horn Measurement problems By: swett on Fri, 04 May 2007 20:23
		Impulse Response By: swett on Fri, 04 May 2007 20:24
		B&C 8PE21 By: Wayne Parham on Sat, 05 May 2007 17:43
		Re: B&C 8PE21 By: swett on Mon, 07 May 2007 21:54
		Midhorn parameters and what changes what By: Wayne Parham on Tue, 08 May 2007 11:00
		Re: Midhorn parameters and what changes what By: swett on Sat, 12 May 2007 16:02
		With top and bottom transitions By: swett on Sat, 12 May 2007 16:08
		Re: With top and bottom transitions By: swett on Sat, 12 May 2007 16:11
		Re: With top and bottom transitions By: Wayne Parham on Sun, 13 May 2007 09:30
		Re: With better top and bottom transitions By: swett on Sun, 13 May 2007 18:04
		Re: With better top and bottom transitions By: Wayne Parham on Mon, 14 May 2007 11:27

Previous Topic:	Wayne, question about One and Two Pi XO
Next Topic:	h290 bolt size

Goto Forum:

] [

]

Current Time: Thu Jun 27 19:20:41 CDT 2024