AudioRoundTable.com: Pi Speakers » Fitting corner horns into a multi-use room

Home » Sponsored » Pi Speakers » Fitting corner horns into a multi-use room

Sun, 15 April 2007 15:21

Tim Barnes
Messages: 46
Registered: May 2009

Baron

The ply I've been using has a lot more than 5 layers - but it's not completely void free, so I'll look for the better quality.

At Southern Lumber this morning they offered me 4'x8'x3/4" Baltic Birch ply for $220 a sheet! But it's clearly a better product...

Here's a picture of what I've been using for my other projects - this is a layup of two thicknesses of 3/4" for a shoe rack.

		Fitting corner horns into a multi-use room By: Tim Barnes on Fri, 13 April 2007 23:08
		Re: Fitting corner horns into a multi-use room By: Wayne Parham on Sat, 14 April 2007 09:53
		Re: Fitting corner horns into a multi-use room By: Tim Barnes on Sat, 14 April 2007 10:27
		You've got mail! By: Wayne Parham on Sat, 14 April 2007 10:34
		Re: You've got mail! By: Tim Barnes on Sat, 14 April 2007 11:22
		Re: You've got mail! By: Wayne Parham on Sat, 14 April 2007 22:21
		Re: You've got mail! By: Tim Barnes on Sat, 14 April 2007 23:20
		Re: You've got mail! By: Wayne Parham on Sun, 15 April 2007 02:50
		Re: Pi Sevens construction By: Tim Barnes on Sun, 15 April 2007 15:21
		Re: Pi Sevens construction By: Wayne Parham on Sun, 15 April 2007 15:57
		Re: Pi Sevens construction By: Tim Barnes on Sun, 15 April 2007 18:55

Previous Topic:	reccomended amplification power
Next Topic:	Theater 4 crossover

Goto Forum:

] [

]

Current Time: Thu Feb 27 09:46:39 CST 2025