AudioRoundTable.com: Pi Speakers » TAD 2 way.. need crossover.

Home » Sponsored » Pi Speakers » TAD 2 way.. need crossover.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: TAD 2 way.. need crossover. [message #50772 is a reply to message #50769]

Wed, 07 March 2007 05:12

dB
Messages: 234
Registered: May 2009

Master

Hi plocke, that was a nice reply from Wayne, the 1600Hz xover.
But thinking about your case I didn't see information on their web site (TAD) about a frequency response curve on their drivers/speakers. In this case is a must have (simulation), unless you know the "material" output from your head. Anyway they are all very similar (construction techniques between brands having the same materials or similar types of characteristics) but I don't have that kind of experience... right Wayne?
Thanks ploke.
Best Regards.

Report message to a moderator

[Message index]

		TAD 2 way.. need crossover. By: plocke on Mon, 05 March 2007 21:22
		Re: TAD 2 way.. need crossover. By: Wayne Parham on Tue, 06 March 2007 01:09
		Re: TAD 2 way.. need crossover. By: plocke on Tue, 06 March 2007 08:46
		Re: TAD 2 way.. need crossover. By: Wayne Parham on Tue, 06 March 2007 12:32
		Re: TAD 2 way.. need crossover. By: plocke on Tue, 06 March 2007 12:43
		Re: TAD 2 way.. need crossover. By: Wayne Parham on Tue, 06 March 2007 14:42
		Re: TAD 2 way.. need crossover. By: dB on Wed, 07 March 2007 05:12
		Re: TAD 2 way.. need crossover. By: Wayne Parham on Wed, 07 March 2007 08:38
		Re: TAD 2 way.. need crossover. By: plocke on Wed, 07 March 2007 11:02
		Re: TAD 2 way.. need crossover. By: Wayne Parham on Wed, 07 March 2007 13:07
		Re: TAD 2 way.. need crossover. By: plocke on Wed, 07 March 2007 14:44
		Re: TAD 2 way.. need crossover. By: Wayne Parham on Wed, 07 March 2007 15:13
		Re: TAD 2 way.. need crossover. By: plocke on Wed, 07 March 2007 15:51
		Re: TAD 2 way.. need crossover. By: plocke on Tue, 06 March 2007 12:26
		You've got mail! By: Wayne Parham on Tue, 06 March 2007 12:38
		Re: You've got mail! By: plocke on Tue, 06 March 2007 12:44

Previous Topic:	dedicated sub
Next Topic:	Pi 2 Towers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Aug 16 10:56:14 CDT 2024