AudioRoundTable.com: Pi Speakers » My first crossover network: pic and questions

Home » Sponsored » Pi Speakers » My first crossover network: pic and questions

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

My first crossover network: pic and questions [message #50725]

Wed, 21 February 2007 20:01

xcortes
Messages: 51
Registered: May 2009

Baron

I had never before built a crossover. Here's the first for my Pi4s. It's still missing a couple of belts. Should I worry of components, particularly resistors, getting too hot and melt the belts? (I will use the speakers with 8 watt amps but maybe someday my kids grow and throw a party :>)). Also, should I also use some hot melt glue to better fix the components? Thanks, xavier

Report message to a moderator

Re: My first crossover network: pic and questions [message #50727 is a reply to message #50725]

Thu, 22 February 2007 06:40

dB
Messages: 234
Registered: May 2009

Master

The hot melt glue is not good when you have to change a component. Some factories use it with good results (acoustic).
(the xover) Looks good for me.(I just can't remember if those you use are non inductance resistors?, if they say so it's oki-doki). If like you say they are "to hot and melt the belts" will be a good warning sign, anyway they sell manufactured supports just for the resistors, try a good shop for that size you use.
The coils are just fine (perfect) I would put them apart because of the magnetic field, or then turn one 90 degrees.(Like one in the vertical pos. and one in the horizontal position).

Report message to a moderator

Re: My first crossover network: pic and questions [message #50728 is a reply to message #50727]

Thu, 22 February 2007 07:02

xcortes
Messages: 51
Registered: May 2009

Baron

the resistors are indeed non inductive, at least that's what parts express sold me . i will indeed turn one of the chokes to have it vertical as you suggested. i will also try to find the belts for the resistors although i might keep these ones temporarily if you don't see much of a risk.

thanks a lot!

xavier

Report message to a moderator

Re: My first crossover network: pic and questions [message #50729 is a reply to message #50728]

Thu, 22 February 2007 08:59

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

Looks very good, although I would rotate one coil so they are oriented 90° to each other, as dB said. You can use silicon glue rather than hot glue if you think you might want to swap components someday. Components can be removed from silicon glue without damage. The resistors will indeed get hot enough to melt the cable-ties at full power, but not at 8 watts.

Report message to a moderator

Re: My first crossover network: pic and questions [message #50730 is a reply to message #50729]

Thu, 22 February 2007 10:06

xcortes
Messages: 51
Registered: May 2009

Baron

Thanks wayne. I will rotate one coil and build the other four crossover networks!

Report message to a moderator

Re: My first crossover network: pic and questions [message #50750 is a reply to message #50730]

Wed, 28 February 2007 17:47

Paul C.
Messages: 218
Registered: May 2009

Master

Regarding gluing the components... for some years now I have been using a class of glues known as "SBR Adhesives". The manufacture's rep I spoke with on the phone says this is Styrene Butadyene Rubber. These glues dry clear, are very slightly rubbery, but quite strong. By having a little flex they maintain a good bond.

If a component needs to be removed, you can slice through the glue with a sharp knife, or just pry it off.

The brands I use are E6000 by Eclectic Products, and Aleene's Platinum Bond 7800 by Aleene's. The 7800 is slightly less viscous than the E6000.

These glues gel up quickly, and are excellent for gluing dissimilar materials, wood to plastic, metal to wood, metal to plastic, etc.

Available in hardware, hobby, and craft shops. I have found both in Walmart.

Report message to a moderator

Previous Topic:	One last question
Next Topic:	Pi 4 Professional

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 02:43:56 CST 2024