AudioRoundTable.com: Pi Speakers » Midhorn Input Data

Home » Sponsored » Pi Speakers » Midhorn Input Data

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Midhorn Input Data [message #50243]

Sat, 11 November 2006 15:52

Cuppa Joe
Messages: 103
Registered: May 2009

Viscount

Hi, Wayne! Since I'm playing around with HornResp for the first time ever, I thought it would be a good idea to have an accurate reference point against which I could compare my early modeling calculations. I would be honored if your Midhorn were that reference, as my focus of interest is in a conical midrange/midbass device. So, I was wondering if you still had the original HornResp Input Parameters for it?

Report message to a moderator

[Message index]

		Midhorn Input Data By: Cuppa Joe on Sat, 11 November 2006 15:52
		Hornresp models By: Wayne Parham on Sat, 11 November 2006 19:43
		Re: Hornresp models By: Cuppa Joe on Sat, 11 November 2006 22:15
		Re: Hornresp models By: Wayne Parham on Sat, 11 November 2006 23:13
		Re: Hornresp models By: Cuppa Joe on Sun, 12 November 2006 14:11
		Re: Hornresp models By: Wayne Parham on Sun, 12 November 2006 22:53
		Re: Hornresp models By: Cuppa Joe on Mon, 13 November 2006 20:44
		Re: Hornresp models By: Wayne Parham on Mon, 13 November 2006 22:03
		Re: Hornresp models By: Cuppa Joe on Thu, 16 November 2006 23:37
		Re: Hornresp models By: Wayne Parham on Sat, 18 November 2006 10:18
		Re: Hornresp models, 0.5pi vs 1pi? By: swett on Tue, 28 November 2006 22:25
		Re: Hornresp models, 0.5pi vs 1pi? By: Wayne Parham on Tue, 28 November 2006 23:34

Previous Topic:	mid-horn
Next Topic:	Eminence PSD2002 vs JBL 2426h

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Jul 13 11:01:41 CDT 2024