AudioRoundTable.com: Pi Speakers » 2 Pi tower decision

Home » Sponsored » Pi Speakers » 2 Pi tower decision

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

2π tower port diameter [message #50241 is a reply to message #50240]

Fri, 10 November 2006 08:48

Wayne Parham
Messages: 18738
Registered: January 2001

Illuminati (33rd Degree)

For 5/8" wood stock, cut a 4.5" diameter port hole.
For 3/4" stock, cut a 4.625" hole.
For 1", cut the hole 4.75" diameter.
For 1.5", cut the hole 5.125".

You can order the tweeters on the shopping cart in the "Parts and Options" section. Look for the "Vifa Upgrade Kit". That kit includes a Vifa DX25 tweeter, Solen 10uF capacitor, 16Ω, 10W non-inductive resistor and two spade lugs.

Report message to a moderator

[Message index]

		2 Pi tower decision By: sailor on Thu, 09 November 2006 07:32
		You've got mail! By: Wayne Parham on Thu, 09 November 2006 08:55
		Re: You've got mail! By: Garland(garland) on Thu, 09 November 2006 11:55
		Re: You've got mail! By: Wayne Parham on Thu, 09 November 2006 13:23
		Re: You've got mail! By: sailor on Fri, 10 November 2006 04:35
		2π tower port diameter By: Wayne Parham on Fri, 10 November 2006 08:48
		Re: 2π tower port diameter By: sailor on Sun, 12 November 2006 07:50
		Re: 2π tower port diameter By: Wayne Parham on Sun, 12 November 2006 10:52

Previous Topic:	blue prints
Next Topic:	Satelite speaker system

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jul 31 10:24:06 CDT 2024