AudioRoundTable.com: Pi Speakers » Crossover Values and Impedance 2nd & 3rd order

Home » Sponsored » Pi Speakers » Crossover Values and Impedance 2nd & 3rd order

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Crossover Values and Impedance 2nd & 3rd order [message #50217]

Sat, 04 November 2006 15:18

Paul C.
Messages: 218
Registered: May 2009

Master

Wayne, we had discussed a while back how for 12 db/oct (2nd order) crossovers, that the driver impedance could vary somewhat without changing crossover frequency. The coil pulling one way, while the value of the capacitor pulled the other, a sort of "self compensating" circuit.

I have seen 2nd order crossovers that were usable with either 8 or 16 ohm drivers. For one impedance the network acted more as a Butterworth, for the other impedance the network acted more as a Linkwitz-Reilly.

Is the same also true for 3rd order / 18 db/oct networks? How does changing impedance affect the crossover frequency in a 3rd order high pass network?

Report message to a moderator

[Message index]

		Crossover Values and Impedance 2nd & 3rd order By: Paul C. on Sat, 04 November 2006 15:18
		Crossovers and complex reactive/resistive loads By: Wayne Parham on Sat, 04 November 2006 15:40

Previous Topic:	Boxplot How To Guide
Next Topic:	811b's and PSD2002 in 4pi Theatre

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jul 29 19:44:54 CDT 2024