AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Pi 4 questions

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Pi 4 questions [message #50081]

Mon, 25 September 2006 08:34

jimbop
Messages: 60
Registered: May 2009
Location: Colorado Springs, CO

Viscount

I've asked this before, but seem to have lost the bookmarks to the info.

I am running Wright Sound 2A3 amps. Which of the Pi 4 speakers would you recommend? I don't think I can afford the Pro series.

Also, I remember reading about using the 7 Series mid horn and tweeter with the 4 Series bass cabinets. What are the benefits (besides eliminating the need for suitable corners in the room).

Does this affect the efficiency of the speakers?

Jim D.

Report message to a moderator

Re: Pi 4 questions [message #50082 is a reply to message #50081]

Mon, 25 September 2006 10:35

Wayne Parham
Messages: 18789
Registered: January 2001

Illuminati (33rd Degree)

The Theater and Professional Series four π loudspeakers are an easy load, both in terms of impedance and efficiency. The Stage four π has the efficiency, but the impedance fluxuates a little more. However, if you add the midhorn, it tends to smooth the impedance curve. It also provides directivity and smoother midrange.

Report message to a moderator

Re: Pi 4 questions [message #50084 is a reply to message #50082]

Mon, 25 September 2006 19:55

jimbop
Messages: 60
Registered: May 2009
Location: Colorado Springs, CO

Viscount

Which of these would work best close to the front wall, and a few feet in from the corners? They don't necessarily need to be right against the wall, but due to their size, they won't be too far out into the room.

Jim

Report message to a moderator

Re: Pi 4 questions [message #50085 is a reply to message #50084]

Mon, 25 September 2006 21:16

Wayne Parham
Messages: 18789
Registered: January 2001

Illuminati (33rd Degree)

Both the Theater Series and Professional Series four π loudspeakers work well with boundary loading, as happens when placed near walls or corners. They're designed for use in quarter or eighth-space. The Stage Series four π works better with a little less boundary influence, and works best in half-space.

Report message to a moderator

Re: Pi 4 questions [message #50089 is a reply to message #50085]

Tue, 26 September 2006 11:17

jimbop
Messages: 60
Registered: May 2009
Location: Colorado Springs, CO

Viscount

So, would I order a 7 Pi kit and plans for the 4 Pi bass cabinet? Are there any other changes needed to do this?

Jim

Report message to a moderator

Re: Pi 4 questions - adding midhorn [message #50092 is a reply to message #50089]

Tue, 26 September 2006 16:14

Wayne Parham
Messages: 18789
Registered: January 2001

Illuminati (33rd Degree)

That's exactly what you do. Use the four π cabinet as the bass bin and run the midhorn and tweeter from the seven π. The crossover from bass bin to midrange is at low frequency, so summing is good as long as the front-to-back spacing between midhorn and woofer is within a couple feet. Spacing between midhorn and tweeter should be exactly as shown in the seven π plans.

Report message to a moderator

Re: Pi 4 questions - Do you have any photos? [message #50105 is a reply to message #50092]

Fri, 29 September 2006 07:43

jimbop
Messages: 60
Registered: May 2009
Location: Colorado Springs, CO

Viscount

Are there any photos of of the 4 - 7 combo? I'd like to see the scale of this implementation.

Report message to a moderator

Re: Pi 4 with midhorn [message #50108 is a reply to message #50105]

Fri, 29 September 2006 09:13

Wayne Parham
Messages: 18789
Registered: January 2001

Illuminati (33rd Degree)

Using the midhorn with a four π is an upgrade that makes sense, but I don't have any photos. It's kind of a hybrid.

Report message to a moderator

Re: Pi 4 with midhorn [message #50109 is a reply to message #50108]

Sun, 01 October 2006 00:54

Paul C.
Messages: 218
Registered: May 2009

Master

Wayne, as you know, I am building the 7pi-18 for my older son, and 4pi Theatre for myself.

Adding the 7pi mid horn later is intriguing. Would it hurt for me to build the 4pi Theatre box, but not make a cutout for the H290 horn, instead sitting that on top? Then later just jack that up and slip the mid in between.

Or would you suggest just building the 4pi Theatre as per plans, with the horn in the box, and just stick the mid on top?

Report message to a moderator

Re: Pi 4 with midhorn [message #50110 is a reply to message #50109]

Sun, 01 October 2006 10:22

Wayne Parham
Messages: 18789
Registered: January 2001

Illuminati (33rd Degree)

Either way is fine - You can install the tweeter in the four π and later install the midhorn on top or you can mount the tweeter externally and move the midwoofer up to keep the distance, orientation and position relationship between them the same. Either way, it is important to keep the tweeter to mid (or midwoofer) relationship as shown in the plans.

Report message to a moderator

Pages (2): [1 2 › »]

Previous Topic:	Wayne - What are the fundemental differences between ....
Next Topic:	multiple driver manifold for horn loading...

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 28 23:42:38 CST 2024