Hy Wayne . I must use the Beta 15 because get them very cheaply here in eminence mexico dealer . So after modeling using WinIsp give a box of 11.25 f3 tuned to 25.6 hz with twin 4x6 ports . My question Wayne Is this modeling through WinIsp according with your Pi aligmnment . Oh what say the Pi modeling to this woofer with this specs--- fs 35 ---Qms 8.10 ---Qes 0.63 ---Qts 0.58 ---Vas 334.4 ---Xmax 4 mm ---pwr 300 -- .thanks for your help.
Wayne Parham Messages: 18704 Registered: January 2001
Illuminati (33rd Degree)
I understand. The Betas are pretty good drivers. I used to use them but felt there was too much overlap in my product lines so I dropped them. As I recall, the Beta 15 would work pretty well in a Theater Series four π cabinet and your analysis tends to confirm this as well.
If you want a great bang for the buck, pick up an Alpha 10 and put it in a 4-5ft3 box tuned to 35Hz. I expect you can get those even cheaper from the dealer near you. They're a great part - can be used for a midrange or a woofer.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
