AudioRoundTable.com: Pi Speakers » Double checking C5 and R3 values

Home » Sponsored » Pi Speakers » Double checking C5 and R3 values

Tue, 18 July 2006 17:55

Norbert
Messages: 42
Registered: May 2009

Baron

I am looking at the C5 and R3 values for Stage 4 Omega 15 driver.

According to Wayne's crossover table C5 and R3 ahould be 60 uF and 8 Ohms respectively...

Now even if I factor in 25% variation for the Zobel circuit allowance I don't even come cross the values Wayne has for C5. So why the discrepancy?

Omega Pro 15:
Re= 5.28 ohms
Le= 1.04 mH

R3 = 1.25 * 5.28 = 6.6 + 25% = 8.25 Ohms > OK
C3 = Le/Re squared = 1.04 x exp-3/5.28 squared = 37.3 uF +25% = 46.6 uF which is short of 60 uF

Norbert

		Double checking C5 and R3 values By: Norbert on Tue, 18 July 2006 17:55
		Re: Double checking C5 and R3 values By: Wayne Parham on Tue, 18 July 2006 22:26
		Re: Double checking C5 and R3 values By: Matts on Wed, 19 July 2006 08:24
		Re: Double checking C5 and R3 values By: Wayne Parham on Wed, 19 July 2006 08:37

Previous Topic:	Hl10c Heatsink data
Next Topic:	7 pi vs la

Goto Forum:

] [

]

Current Time: Sun Dec 01 17:45:00 CST 2024