AudioRoundTable.com: Pi Speakers » Heat exchanger effectiveness

Home » Sponsored » Pi Speakers » Heat exchanger effectiveness

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Heat exchanger effectiveness [message #49733 is a reply to message #49728]

Tue, 18 July 2006 11:26

Tako Tamas
Messages: 4
Registered: May 2009

Esquire

DC resistance results both from you and from Leland would be nice...
BTW How did you measure the DC resistance? I know it is quite simple when the speaker is cold. You just need a good multimeter..
But while it is driven by an AC source it could be a bit difficult.
And when you remove the signal from the speaker, it starts to cool down quite quick....

Thanks,

Tamas

Report message to a moderator

[Message index]

		Heat exchanger effectiveness By: Wayne Parham on Wed, 21 June 2006 13:27
		Re: Heat exchanger effectiveness By: Leland Crooks on Fri, 23 June 2006 05:45
		Re: Heat exchanger effectiveness By: Wayne Parham on Fri, 23 June 2006 10:08
		Re: Heat exchanger effectiveness By: Leland Crooks on Fri, 23 June 2006 10:17
		Re: Heat exchanger effectiveness By: Wayne Parham on Fri, 23 June 2006 11:05
		Re: Heat exchanger effectiveness By: Tako Tamas on Sat, 15 July 2006 14:19
		Re: Heat exchanger effectiveness By: Wayne Parham on Sat, 15 July 2006 18:02
		Re: Heat exchanger effectiveness By: Tako Tamas on Sun, 16 July 2006 15:05
		Re: Heat exchanger effectiveness By: Wayne Parham on Mon, 17 July 2006 02:27
		Re: Heat exchanger effectiveness By: Tako Tamas on Tue, 18 July 2006 11:26
		Re: Heat exchanger effectiveness By: Wayne Parham on Tue, 18 July 2006 15:34
		Re: Heat exchanger effectiveness By: Wayne Parham on Thu, 23 June 2011 17:25

Previous Topic:	12π basshorn subwoofer - the best yet!
Next Topic:	Looking for a video

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 22:17:08 CST 2024