AudioRoundTable.com: Pi Speakers » Okay, so Wayne was right.

Home » Sponsored » Pi Speakers » Okay, so Wayne was right.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Okay, so Wayne was right. [message #49595]

Wed, 07 June 2006 14:47

GarMan
Messages: 960
Registered: May 2009

Illuminati (2nd Degree)

Last couple of days, I've been searching for a tweeter for my full/wide range driver speaker project. After reviewing specs on almost every tweeter from almost every manufacturer, guess which one I ended with? Vifa DX25. With all things considered, it ended with the best combination of price, extension, smoothness, sensitivity and dispersion. Sometimes, you just have to find your own way home.

Gar.

Report message to a moderator

Wayne was right. [message #49598 is a reply to message #49595]

Wed, 07 June 2006 17:06

spkrman57
Messages: 522
Registered: May 2009

Illuminati (1st Degree)

Wayne spent considerable time and effort in coming up with the Vifa DX25 tweeter. It is indeed a great tweeter for the application used in the Pi systems.

Ron

Report message to a moderator

Re: Wayne was right. [message #49602 is a reply to message #49598]

Thu, 08 June 2006 11:45

dB
Messages: 234
Registered: May 2009

Master

Yes. Another thing that I discovered when working with it's parameters for other guys, was that, after that they considered using another Vifa Tweeter, it was no easy task because of impedance. You have to xover the tweeter driver and respect impedance.

So this guy had a Vifa tweeter (TC26TG05-06 or similar, I think) xovered in a box and he just bought a new one the XT25TG30-04. And he didn't wanted to change the x-overs or mess inside the box. Ha-ha, what happen was that the first tweeter was 4.6 Ohms and the new one that he bought was (the one w/the spike) 2.9 Ohms, he thought it would be more powerfull. And wasn't, it come down about 6dB because of bad impedance xover. Since I runned it in Spice (thanks Wayne) I new what it was and the other guys in the forum were going crazy.

I think that, Wayne might confirm, one of the main reasons the DX25 is good and he chose it, besides good shelf output is it's low resonance frequency. Wayne is xovering speakers very low in same cases and he needs good low resson. freq. drivers.
Regards

Report message to a moderator