Home » Sponsored » Pi Speakers » driver ?
driver ? [message #49320] Fri, 14 April 2006 16:44 Go to next message
j.luis cruz . is currently offline  j.luis cruz .
Messages: 154
Registered: May 2009
Master
Hy Wayne . do you have a Pi alignament to this driver fs =41 hz , Re =6.3 , Qes = 0.64 , Qms = 6.65 , Qts = 0.58 , Vas = 186 lts , Xmax = 4.8 mm , Xmech = 33.o2 mm . this driver is the Delta 15 LF by Eminence . I would like a box as the Stage 4 size . Could fit a stage 4 . Thanks

Re: driver ? [message #49323 is a reply to message #49320] Sat, 15 April 2006 09:37 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18791
Registered: January 2001
Illuminati (33rd Degree)

The Eminence Delta 15LF is suitable for 3.0ft3 to 20.0ft3 cabinets tuned to 25Hz. PiAlign suggests 4.0ft3, which makes a great alignment for good bass response in a small package. For a subwoofer, go larger than 10.0ft3 if possible.


thanks Wayne * [message #49326 is a reply to message #49323] Sun, 16 April 2006 15:16 Go to previous messageGo to next message
j.luis cruz . is currently offline  j.luis cruz .
Messages: 154
Registered: May 2009
Master
Hy . Thanks for you recomended 4 f3 to the Delta 15 LF. just a last thing that dimensions of port to this box .thanks again

Re: thanks Wayne * [message #49329 is a reply to message #49326] Mon, 17 April 2006 10:45 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18791
Registered: January 2001
Illuminati (33rd Degree)

The PiAligned cabinet of 4ft3 uses a 3" diameter port, 5" long. Larger boxes will require different ports.


Previous Topic: piezo n pieces
Next Topic: Oh MY
Goto Forum:
  


Current Time: Sat Nov 30 13:00:54 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest