AudioRoundTable.com: Pi Speakers » Wayne- L2 for Stage 4's ?

Home » Sponsored » Pi Speakers » Wayne- L2 for Stage 4's ?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Wayne- L2 for Stage 4's ? [message #49296]

Mon, 10 April 2006 12:39

Matts
Messages: 359
Registered: May 2009

Grand Master

I can't find the value on the schematic- says it's a different value with the 1K6xx xover, but doesn't say what it is. Building an "upgrade" xover....

Thanks!

Report message to a moderator

Re: Wayne- L2 for Stage 4's ? [message #49297 is a reply to message #49296]

Mon, 10 April 2006 14:40

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

L2 = 1.0mH

Report message to a moderator

Re: Wayne- L2 for Stage 4's ? [message #49298 is a reply to message #49297]

Mon, 10 April 2006 16:08

Matts
Messages: 359
Registered: May 2009

Grand Master

thanks. Was wondering, because there's a footnote on the schematic that says it's "1.0mH except for woofers using crossover 1K6...", but it didn't say what it did use.

Report message to a moderator

Previous Topic:	2pi bass
Next Topic:	System seven

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 22 16:24:07 CST 2024