Home » Sponsored » Pi Speakers » mid-horn
mid-horn [message #49199] Mon, 27 March 2006 16:46 Go to next message
j.luis cruz . is currently offline  j.luis cruz .
Messages: 154
Registered: May 2009
Master
Hy. Wayne . which is the frecuency that handle the alpha 10 in a 7pi mid-horn running without crossover . could reach 3500 hz . thanks

Re: mid-horn [message #49201 is a reply to message #49199] Tue, 28 March 2006 08:33 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18791
Registered: January 2001
Illuminati (33rd Degree)

The Alpha 10 is best crossed over at 1.6kHz. Response is great to that point, then falls 15dB at 2kHz. That makes a perfect place to crossover, since the acoustic rolloff adds to the electrical rolloff to make a nice clean break.

Above 2kHz, output rises to the nearly the midband SPL and remains high to about 3.5kHz. So if there is no electrical crossover, the horn generates output to 3.5kHz, with a dip at 2kHz.


Previous Topic: Compensation circuit when using active crossover
Next Topic: 90 deg vs. 60 deg horns
Goto Forum:
  


Current Time: Sun Dec 01 12:26:44 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest