AudioRoundTable.com: Pi Speakers » Question about matching tweet to woof???

Home » Sponsored » Pi Speakers » Question about matching tweet to woof???

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Question about matching tweet to woof??? [message #49133 is a reply to message #49128]

Thu, 16 March 2006 13:51

GarMan
Messages: 960
Registered: May 2009

Illuminati (2nd Degree)

A 1.5uF cap against an 8 ohm driver would set the XO point at about 13KHz, which like Wayne said, is quite high. Nevertheless, signal would only be approx 17 or 18dB down at the recommended XO point of 2500Hz which does not seem to be enough to protect the driver.

Also, doesn't attaching the cap directly to the driver make it difficult to properly implement an L-pad? Typically, L-pad sits between XO and driver.

Report message to a moderator

[Message index]

		Question about matching tweet to woof??? By: Bill Epstein on Wed, 15 March 2006 06:59
		Re: Question about matching tweet to woof??? By: Wayne Parham on Wed, 15 March 2006 08:44
		Re: Question about matching tweet to woof??? By: Bill Epstein on Wed, 15 March 2006 18:27
		Re: Question about matching tweet to woof??? By: Wayne Parham on Thu, 16 March 2006 08:43
		Re: Question about matching tweet to woof??? By: GarMan on Thu, 16 March 2006 13:51

Previous Topic:	Spice files models
Next Topic:	Theater 4 Tweaking - Wayne?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 11:09:11 CST 2024