AudioRoundTable.com: Pi Speakers » Question about matching tweet to woof???

Home » Sponsored » Pi Speakers » Question about matching tweet to woof???

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Question about matching tweet to woof??? [message #49115]

Wed, 15 March 2006 06:59

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

Got a 98dB sensitive woofer in a 1.45 cu ft 2 way vented box tuned to 50 Hz. One tweeter choice is 90.5 dB. How do I bring the woofer in line, crossed at about 2500Hz.
I also have a CD horn that came with a 1.5 uF cap could maybe also use that to bring up the treble?

Report message to a moderator

Re: Question about matching tweet to woof??? [message #49119 is a reply to message #49115]

Wed, 15 March 2006 08:44

Wayne Parham
Messages: 18791
Registered: January 2001

Illuminati (33rd Degree)

I wouldn't drop the sensitivity of the woofer to match. You can do it with a transformer or L-Pad, but I wouldn't. Too much power in the range you're talking about - 90% of the power is under 2.5kHz, hardly any power above. So I'd use a more efficient tweeter instead of padding the woofer.

Report message to a moderator

Re: Question about matching tweet to woof??? [message #49126 is a reply to message #49119]

Wed, 15 March 2006 18:27

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

Why do you think this horn ships with a 1.5uF cap? The specs recommend a 2500 Hz cross. Maybe it's a little delicate?

CD Horn

Report message to a moderator

Re: Question about matching tweet to woof??? [message #49128 is a reply to message #49126]

Thu, 16 March 2006 08:43

Wayne Parham
Messages: 18791
Registered: January 2001

Illuminati (33rd Degree)

A single cap is a first-order network which is practically nothing at all for a compression horn. There is so much low frequency energy passing through a first-order highpass cap that the -3dB frequency point would have to be set very high. I think that's why they've chosen such a small value cap.

Report message to a moderator

Re: Question about matching tweet to woof??? [message #49133 is a reply to message #49128]

Thu, 16 March 2006 13:51

GarMan
Messages: 960
Registered: May 2009

Illuminati (2nd Degree)

A 1.5uF cap against an 8 ohm driver would set the XO point at about 13KHz, which like Wayne said, is quite high. Nevertheless, signal would only be approx 17 or 18dB down at the recommended XO point of 2500Hz which does not seem to be enough to protect the driver.

Also, doesn't attaching the cap directly to the driver make it difficult to properly implement an L-pad? Typically, L-pad sits between XO and driver.

Report message to a moderator

Previous Topic:	Spice files models
Next Topic:	Theater 4 Tweaking - Wayne?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 09:12:53 CST 2024