AudioRoundTable.com: Pi Speakers » Free Space in Front of Pi Seven Inner Port

Home » Sponsored » Pi Speakers » Free Space in Front of Pi Seven Inner Port

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Free Space in Front of Pi Seven Inner Port [message #48823]

Sun, 12 February 2006 13:38

Tobias
Messages: 19
Registered: May 2009

Chancellor

I'm building the bass bins for the Pro Pi Sevens, and was surprised that there is only 3/4" of free space between the inner port and the front panel. Am I reading the plans correctly?

Report message to a moderator

Re: Free Space in Front of Pi Seven Inner Port [message #48824 is a reply to message #48823]

Sun, 12 February 2006 13:54

Wayne Parham
Messages: 18786
Registered: January 2001

Illuminati (33rd Degree)

The port looks kind of like a periscope. It's 3.5" x 6.25" and spans nearly the full width of the cabinet. Does that describe what you're thinking?

Report message to a moderator

Re: Free Space in Front of Pi Seven Inner Port [message #48825 is a reply to message #48824]

Sun, 12 February 2006 14:26

Tobias
Messages: 19
Registered: May 2009

Chancellor

Wayne,

It's the depth of the port that has me concerned. If you add 3/4" for the baffle, 6 1/4" for the interior width of the port, 3/4" for the inner port wall, and 3/4" for the front panel, that adds up to 8 1/2". The depth of the cabinet dimensions on the plan is 9 1/4", so that leaves only 3/4" of free space between the inner port opening and the front panel. Before I proceed to permantly glue up the port I just want to make sure I was reading the plan correctly.

Tom

Report message to a moderator