AudioRoundTable.com: Pi Speakers » Pre Compensation Load on X-OVERS and L-Pads

Home » Sponsored » Pi Speakers » Pre Compensation Load on X-OVERS and L-Pads

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Pre Compensation Load on X-OVERS and L-Pads [message #48579 is a reply to message #48576]

Tue, 10 January 2006 20:28

Wayne Parham
Messages: 18788
Registered: January 2001

Illuminati (33rd Degree)

There are lots of different complexities of models and many different crossovers shown in that document. Some model the loudspeaker as a simple series coil and resistor, others go a step further and model the mechanical resonance with a tank circuit. I'm sure with your familiarity with Spice you can tell what is what, it just takes a minute to follow it through.

Report message to a moderator

[Message index]

		Pre Compensation Load on X-OVERS and L-Pads By: dB on Tue, 03 January 2006 14:28
		Re: Pre Compensation Load on X-OVERS and L-Pads By: Wayne Parham on Tue, 03 January 2006 15:15
		Re: Pre Compensation Load on X-OVERS and L-Pads By: dB on Fri, 06 January 2006 04:50
		Re: Pre Compensation Load on X-OVERS and L-Pads By: Wayne Parham on Fri, 06 January 2006 08:48
		Re: Pre Compensation Load on X-OVERS and L-Pads By: dB on Tue, 10 January 2006 17:04
		Re: Pre Compensation Load on X-OVERS and L-Pads By: Wayne Parham on Tue, 10 January 2006 20:28
		Re: Pre Compensation Load on X-OVERS and L-Pads By: dB on Wed, 11 January 2006 12:29

Previous Topic:	7pi
Next Topic:	Pro Pi4 plans please.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 11:42:04 CST 2024