Home » Sponsored » Pi Speakers » Two Tower initial impressions
Re: Two Tower initial impressions [message #48224 is a reply to message #48223] Thu, 17 November 2005 12:28 Go to previous messageGo to previous message
Shane is currently offline  Shane
Messages: 1117
Registered: May 2009
Illuminati (3rd Degree)
Also, there could be several other factors. The fact that I have a double front baffle where the front piece is 2" narrower on each side making a double step off of each side is probably not helping any matters. I can't remedy that till I veneer the front as oak strips are filling that edge space. And the fact that they are in corners where the side wall is long, but the back wall is only about a foot wider than the speaker cab then followed by an open doorway (this is on each side) then a wall in between the openings where the stereo sits can't help either. Unfortunately that will not change as I'm not putting my good system in the living room, it'll have to stay in the bedroom.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: request for 2 pi bass reflex plans
Next Topic: Request for wooden HF horn plans
Goto Forum:
  


Current Time: Sun Jul 28 11:27:56 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest