rajeev the heat is on . you need a driver with a screw vented pole . this is the female part then go make the male part with a simple tube atchment joined for a round aluminium disc. O better wait for the Wayne price after mass production.
I think the screw will not give as good conduction as a tight fit male with some silicone grease , I asked wayne if this male should also have a hole in the centre for even better cooling with air passing through it .
Wayne Parham Messages: 18786 Registered: January 2001
Illuminati (33rd Degree)
Increased surface area generally makes a better interface and therefore better heat transfer. So a threaded plug would probably be sligntly better than one that is press fit. Either way, the heat conductive grease should be used for best heat transfer.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
