Dear Wayne, I read about the woofer cooling technique you have developed , can we use similar method for other woofers too , like this they will remain cooler and that too with increased power handling , will an alinimum finned heat sink glued to the woofer magnet help ?? Rajeev
Wayne Parham Messages: 18784 Registered: January 2001
Illuminati (33rd Degree)
The cooling device isn't limited to basshorns by any means. It can be installed on just about any loudspeaker to improve power handling. You can mount it to an exterior cabinet panel or you can make a bracket to support the device inside.
Woofer Heat Exchanger
The thing that is most important is to have as much surface area contact as possible with the pole piece, and in many woofers, the best place to do this is through the cooling vent. Eminence woofers, for example, have a center pole piece made of steel and an aluminum tube inserted makes a much better conductor of heat. By inserting it completely, there is a large contact area between the pole piece and the cooling plug, and this allows a good interface. Heat is carried away effectively, and radiated by the attached plate.
Wayne Parham Messages: 18784 Registered: January 2001
Illuminati (33rd Degree)
The priniciples should work with a compresson driver, but unless its cooled with a vent, no cooling plug could be adapted. The aluminum parts to conduct, radiate and dissipate heat would have to be designed in from the start.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
