AudioRoundTable.com: Pi Speakers » Altec + JBL =PI four?

Home » Sponsored » Pi Speakers » Altec + JBL =PI four?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Altec + JBL =PI four? [message #47821]

Thu, 29 September 2005 18:16

beto1
Messages: 36
Registered: May 2009

Baron

Hi,
sorry, but this is a question from an ignorant:
Can I use a pair of 802-D (811-B horn)16 Ohms Altec compression drivers with a pair of 2226H JBL woofers? In summ, can I use 16 and 8 Ohms drivers together? All this to drive an Audio Note Kit One, 300B SET amp with 8 and 4 Ohms outputs.
Thanks in advance,
Beto.

Report message to a moderator

Re: Altec + JBL =PI four? [message #47823 is a reply to message #47821]

Fri, 30 September 2005 02:31

Wayne Parham
Messages: 18789
Registered: January 2001

Illuminati (33rd Degree)

That makes a very nice combination. Several people here have done exactly that.

Report message to a moderator

Re: Altec + JBL =PI four? [message #47824 is a reply to message #47823]

Fri, 30 September 2005 08:14

beto1
Messages: 36
Registered: May 2009

Baron

Hi Wayne,
Bill told me that I have to use an attenuation matrix. My idea is to build the 4 PI speakers, with 2226H woofer and Eminence tweeter, but in the meantime, some guy offer me this vintage drivers.
Also, this change the enclosure, of course.
Regards,
Beto

Report message to a moderator

Can some JBL+ALTEC share.... [message #47832 is a reply to message #47823]

Sat, 01 October 2005 23:04

beto1
Messages: 36
Registered: May 2009

Baron

Can some PI, JBL(8)+Altec(16) owner can share his experience....,
(300BSET to hear "in the flat field" bauhaus stuff?)

Report message to a moderator

Re: Can some JBL+ALTEC share.... [message #47833 is a reply to message #47832]

Sat, 01 October 2005 23:38

Wayne Parham
Messages: 18789
Registered: January 2001

Illuminati (33rd Degree)

I'm sure some of the guys that have systems like that, but in the meantime, here's a list of Altec posts:

Altec posts

Report message to a moderator

Re: Can some JBL+ALTEC share.... [message #47835 is a reply to message #47833]

Sun, 02 October 2005 05:06

spkrman57
Messages: 522
Registered: May 2009

Illuminati (1st Degree)

I've done in in the past and Epstein also!

Ron

Report message to a moderator

Re: Can some JBL+ALTEC share.... [message #47836 is a reply to message #47835]

Sun, 02 October 2005 05:09

spkrman57
Messages: 522
Registered: May 2009

Illuminati (1st Degree)

Sorry, should add more info.

I used 15 ohm parallel and 30 ohm series w/.47 ufd parallel for the bigger metal horns.

Works quite fine in my mind!

Regards, Ron

Report message to a moderator

Re: Altec + JBL =PI four? [message #47838 is a reply to message #47821]

Sun, 02 October 2005 15:38

JLapaire
Messages: 156
Registered: May 2009

Master

Beto,

I'm using something like that right now - JBL 2446j 2" 16 ohm compression drivers with Eminence Delta Pro-15 8 ohm bass drivers. Less padding is needed on the HF is all.

John

Report message to a moderator