AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » horn design*

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

horn design* [message #47805]

Mon, 26 September 2005 19:28

j.luis cruz .
Messages: 154
Registered: May 2009

Master

Hi Wayne..do you have a speaker design to a 15 or 18 inch driver modeled with *Hornresp* program that you have to offer..thanks

Report message to a moderator

12 π basshorn subwoofer [message #47807 is a reply to message #47805]

Mon, 26 September 2005 21:47

Wayne Parham
Messages: 18791
Registered: January 2001

Illuminati (33rd Degree)

You might look at the 12 π basshorn subwoofer. It doesn't use a 15" or 18" driver, but uses a pair of 12" drivers instead. This gives it the same diaphragm surface area as an 18" driver. I'll have one at the Prosound Shootout in a couple of weeks, and will post measurements after the event.

12 π basshorn subwoofer

Report message to a moderator

Previous Topic:	2 and 3 Pi plans
Next Topic:	12 π basshorn - Coming together - Part 1

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 11:33:24 CST 2024