AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Horn lens and SPL

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Horn lens and SPL [message #47798 is a reply to message #47797]

Mon, 26 September 2005 10:29

Wayne Parham
Messages: 18786
Registered: January 2001

Illuminati (33rd Degree)

One of the best ways to measure is to run the horn at 100 watts and set the measurement microphone 10 meters away. This will give the same reading as 1W input measured at 1 meter and it serves to scale the measurement so that errors are reduced. Some horns are longer than a meter so this helps deal with that.

Report message to a moderator

[Message index]

		Horn lens and SPL By: Paul C. on Sun, 25 September 2005 22:53
		Re: Horn lens and SPL By: Wayne Parham on Sun, 25 September 2005 23:13
		Re: Horn lens and SPL By: Paul C. on Mon, 26 September 2005 07:58
		Re: Horn lens and SPL By: Wayne Parham on Mon, 26 September 2005 10:29

Previous Topic:	Two π Tower Plans request
Next Topic:	Subs from Alpha 10 drivers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 26 18:32:47 CST 2024